E-Bike Diagnostic Repairs
We can assist with repairs to your E-Bike. 

Quick diagnostic report and E-Bike update 
for Bosch and Hyena drive systems.
We will plug your bike into diagnostic computer to
1. Read and Print errors, diagnostics, and notes. 
2. Update controller, battery, and User Interface.
3. Clear specific errors for future diagnostic.
$10.00

E-Bike Diagnostic 1 Quick
Quick check over
1. Battery, Record Voltage.
2. Quick look at exterior Wires for damage and connections are secure. ( display, motor connector, throttle/PAS wires)
3. Diagnostics report and updates if available.
$25.00

Electric eBike Diagnostic 2 Basic

Basic check over
1. Battery: Record Voltage, Resistance, FAST Load test @ 0.2c/rate upto 0.7c/rate for a min or two to make sure BMS or battery Voltage does not drop off.
2. Quick look at exterior Wires for damage and connections are secure. (display, motor connector, throttle/PAS wires)
3. Diagnostic tool if available, BHbike, Hyena Hydrive, Bosch, etc
$45.00

E-Bike Diagnostic 3 Full

Full Diagnostic
1. Battery: Record Voltage, Resistance, FAST Load test @ 0.2c/rate upto 0.7c/rate for a min or two to make sure BMS or battery Voltage does not drop off.
2. Inspection: exterior Wires for damage and connections are secure. (display, motor connector, throttle/PAS wires)
3. Probe Wire harness make sure connections are good.
4. Open compartments for access to Connections, BLDC controller connections.
5. Diagnostic tool if available, BHbike, Hydrive, Bosch, etc
6. Test Motor wires for hall faults or continuity.
7. swap BLDC controller if possible to test bike.
8. Swap motor if possible to test electronics.
$65.00

 

Electric eBike Diagnostic BATTERY ONLY Quick

1. Check Battery charging. With customers charger and shop charger*.
3. Record Voltage of battery*
4. FAST Load test* @ 0.2c/rate upto 0.7c/rate for a min or two to make sure BMS or battery Voltage does not drop off.
$20.00

Electric E-Bike Diagnostic Battery Load test FULL, Recondition
Full Battery Load Test.
1. Charge battery 100%
REST for 1 hour
Record full voltage.
Record Resistance of battery

2. Load test @ Variable current from 1C to .2C /Ratings Depending on battery type
Discharge until 10% charge left.
Record data: Voltage and Watt Hour, Save Data and graphs when applicable

3.Charge Battery, Rest, Record voltage.

4. Load test 2
Load test @ .2c /Rate
Record WH/AH till 10% SOC.
Save Data and graphs when applicable
Record voltage and resistance at 10% SOC.
Rest +10 min.
record rested voltage.

5. Charge battery to customer requested charge, ~80% if storing battery.
$100

 

Please note: 

We’re happy to help with your E-Bike, even if it’s from a brand we don’t carry. While we strive to provide comprehensive service, please be aware that we recommend checking your manufacturer’s warranty first, as many companies (including Pedego and Priority Bikes) offer excellent coverage. We can assist with diagnostics, repairs, and parts replacement, and even help you communicate technical issues to the manufacturer. However, we are unable to directly contact direct-to-consumer brands on your behalf (such as Rad Power Bikes and Lectric Bike Company).